The high-fertility cycle: How timely pregnancies in one lactation may lead to less body condition loss,fewer health issues,greater fertility,and reduced early pregnancy losses in the next lactation

Body condition loss during early lactation varies among cows in the herd and is associated with future health and reproductive outcomes. The objective of this study was to gain a greater understanding of the relationship between previous calving interval and body condition change during the first 30 d in milk (DIM) and their relationship to subsequent fertility and health variables and sex ratio at birth. Dry cows and heifers (n = 851) from a single farm entered the study approximately 25 d before the due date. They were evaluated and given a body condition score on a 1-to-5 scale with 0.1-point increments weekly until parturition. Body condition score was assessed within 1 wk of parturition and then again 27 to 33 DIM. Previous calving interval, gestation length, periparturient health events (giving birth to twins, dystocia, retained placentas, ketosis, metritis, and displaced abomasum), sire net merit ($), and milk data were used for each cow as recorded in PCDART (Dairy Records Management Systems, Raleigh, NC) by the herd managers. Longer previous calving intervals were related to greater body condition at parturition and body condition loss during the first 30 DIM. A 75% greater proportion of cows with a calving-to-pregnancy interval shorter than 130 d maintained or gained body condition during the first 30 DIM compared with cows with calving-to-pregnancy intervals longer than 130 d. Multiparous cows that maintained or gained body condition (n = 144) had greater pregnancies per AI following first service compared with cows that lost body condition (n = 577) during the first 30 DIM when health events were considered or removed. When cows with health events were considered, multiparous cows that maintained or gained body condition had a greater percentage pregnant by 130 DIM compared with cows that lost body condition (67 vs. 55%; n = 522). Cows that lost body condition during the first 30 DIM regardless of health events experienced greater pregnancy loss (n = 224) between 35 and 60 d after first AI (0.0 vs. 6.7%) compared with cows that maintained or gained body condition (n = 69) during that period. Based on data in this study from a single herd, maintaining a cycle of pregnancy before 130 DIM may reduce the amount of body condition lost after the next parturition, enhance subsequent pregnancies per AI, and reduce the possibility of early pregnancy loss. We refer to this phenomenon as the high-fertility cycle.     

Investigation of Nafion series membranes on the performance of iron‐chromium redox flow battery

To boost the performance of the iron‐chromium redox flow battery (ICRFB), opting an appropriate proton exchange membrane (PEM) as the core component of ICRFB is of great importance. For the purpose, in this paper, various widely adopted commercial Nafion membranes with a different thickness of 50 μm (Nafion 212, N212), 126 μm (N115), and 178 μm (N117) are chosen for the sake of evaluating the influence of membrane thickness on the ICRFB single‐cell performance. Physicochemical properties, electrolyte utilization, cell efficiency, long‐term cycling stability, and the self‐discharge process of ICRFBs based on a series of Nafion membranes are contrasted comprehensively. The cycling test of ICRFBs is carried out under the current density range of 40 to 120 mA/cm² for the charge‐discharge process. As a result of the good equilibrium of membrane resistance and electro‐active species permeability, Nafion 212 membrane exhibits the highest electrolyte utilization and energy efficiency during the operation, accompanied by the lowest overpotential. In the final part, the selection of Nafion membrane thickness was optimized on the basis of single‐cell performance and the overall cost of the system.     

Electrochemical performance and modeling of lithium‐sulfur batteries with varying carbon to sulfur ratios

Lithium‐sulfur batteries have attracted much research interest because of their high theoretical energy density and low‐cost raw materials. While the electrodes are composed of readily available materials, the processes that occur within the cell are complex, and the electrochemical performance of these batteries is very sensitive to a number of cell processing parameters. Herein, a simple electrochemical model will be used to predict, with quantitative agreement, the electrochemical properties of lithium‐sulfur cathodes with varying carbon to sulfur ratios. The discharge capacity and the polarization were very similar for the lowest sulfur loadings, while above 23.2 wt% sulfur the gravimetric capacity dropped significantly, and there was an increase in the cell polarization. In addition, a transition in the electrode morphology, from well dispersed to aggregated sulfur at the surface, will be reflected in the change in a critical model parameter demonstrating the sensitivity and functionality of even this simple model in predicting complex behavior in the lithium‐sulfur cells.     

A coupled and interactive influence of operational parameters for optimizing power output of cleaner energy production systems under uncertain conditions

The mechanisms in proton‐exchange membrane fuel cells (PEMFCs) cannot be explicitly represented by a mathematical function because the PEMFC system is multi‐dimensional and complex and represents uncertainty in operation variables, which cannot be modeled by experiments or by trial‐and‐error approach. Therefore, this work proposes to study the coupled and interactive influence of stack current (SC), stack temperature (ST), oxygen excess ratio (OER), hydrogen excess ratio (HER), and inlet air humidity (IAH) for optimizing the power output of PEMFC. The data obtained from the experiments have been inserted into architecture of automated neural‐network search, which automates the selection of error function, activation function, uncertainties in inputs and number of hidden neurons in formulation of a robust and accurate model for power density as a function of five operational variables. Among the operational variables, the correlation coefficient between the SC and the output power is the highest, followed by OER, and the ST. However, for HER and IAH, the power output follows negative nonlinear relation. The optimization converged at 130^th iteration results in maximum power output of 3410 W for an optimum value of SC (51A), ST (59°C), OER (3:2), HER (1:10), and IAH (0.8).     

宽尾墩体型对高拱坝表孔最大压力的影响

宽尾墩应用于高拱坝表孔后会增大壁面压力,在一定程度上增加了结构设计难度,为探究表孔壁面最大压力与宽尾墩体型之间的关系,采用数值计算方法研究了宽尾墩收缩比、收缩率等体型参数对高拱坝表孔流道中心线及侧墙最大压力的影响。结果表明,堰面中线与侧墙最大压力均随收缩率的增大而增大,随收缩比的增大而减小;并推出表孔流道中线及侧墙最大压力与收缩率、收缩比之间的定量计算公式,从而为表孔宽尾墩的结构设计提供参考。     

Experimental investigations and constitutive modeling of cyclic interface shearing between HDPE geomembrane and sandy gravel

This paper presents the results of experimental investigations and constitutive modeling of cyclic interface shearing between HDPE geomembrane and cohesionless sandy gravel. A series of cyclic interface shear tests was performed using a large-scale cyclic shear apparatus with servo controlled system. Particular attention was paid to the influences of the amount of shear-displacement amplitude, number of cycles, shear rate and the normal pressure on the mechanical response. The experimental results show that the path of the shear stress against the cyclic shear displacement is strongly non-linear and forms a closed hysteresis loop, which is pressure dependent, but almost independent of the shear rate. For small shear-displacement amplitudes, the obtained damping ratio is significantly greater than zero, which is different to the behavior usually observed for cyclic soil to soil shearing. In order to describe the pressure dependency of the hysteresis loop using a single set of constitutive parameters, new approximation functions are put forward and embedded into the concept of the Masing rule. Further, a new empirical function is proposed for the damping ratios to capture the experimental data for both small and large cyclic shear-displacement amplitudes. The included model parameters are easy to calibrate and the new functions may also be useful in developing enhanced constitutive models for the simulation of the cyclic interface shear behavior between other geosynthetics and soils.     

Influence of the weight ratio of polydimethylsiloxane modified gelatin to silicone rubber on the potential performance of asymmetric bilayer membranes as wound dressings

Asymmetric bilayer membranes have been regarded as ideal wound dressings for skin regeneration. Our previous work reported the potential advantages of polydimethylsiloxane modified gelatin/silicone rubber (PGE/SR) asymmetric bilayer membrane as a wound dressing. However, it is still unknown whether the proportion of the two components of the bilayer membrane has a prominent influence on its relevant performance. Herein, various PGE/SR membranes with different PGE:SR weight ratios (100:25, 100:50 and 100:100) were fabricated through a self‐stratification method driven by surface tension gradients. Subsequently, the effects of the PGE:SR ratios on the relevant performance (i.e. porous structure, mechanical properties, degradability and biocompatibility) of PGE/SR membranes were systematically investigated. The current results demonstrate that the separating force between the PGE and SR components was reduced significantly on increasing the content of SR, and in particular the PGE/SR1 membrane (100:25) exhibited a well‐defined asymmetric bilayer structure with high porosity, appropriate toughness, water uptake, swelling ratio and water permeability. Concomitantly, the maximum weight loss for the PGE/SR1 membrane was ca 70.65% after 9 days of enzymatic degradation, which met the typical healing period of a normal skin wound. In addition, both the original and degraded PGE/SR1 membrane possessed favorable cytocompatibility in vitro, suggesting its potential application as a wound dressing. © 2019 Society of Chemical Industry     

Photoinitiated synthesis of poly(poly(ethylene glycol) methacrylate-co-diethyl amino ethyl methacrylate) superabsorbent hydrogels for dye adsorption

Random copolymers of poly(ethylene glycol) methacrylate (PEGM), and diethyl amino ethyl methacrylate (DEAEM) were synthesized at low, and high conversions by photoinitiation. Crosslinked poly(PEGM-co-DEAEM) samples were obtained, and characterized by FTIR, SEM, DSC, TGA, and elemental analyses. Swelling behavior of the copolymers revealed that the copolymers acted as superabsorbent hydrogels. The monomer reactivity ratios were calculated using Fineman Ross, Extended Kelen Tüdøs , and Mayo Lewis methods that gave r₁(PEGM) = 0.90, r₂(DEAEM) = 0.14 at low conversions. At high conversions r₁ and r₂ values were calculated as 1.01 and 0.40, respectively. Adsorption isotherms of methyl orange (MO) onto hydrogels were studied using Langmuir, Freundlich, and Temkin models. The experimental data fitted well with the Langmuir equation. The maximum adsorption capacity for MO was 212.7 mg g⁻¹ at pH = 3. The adsorption data gave best fit with the pseudo-second order kinetic model. Thermodynamic evaluation showed spontaneous nature for MO adsorption onto poly(PEGM-co-DEAEM) hydrogels. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47707.     

唐家河煤矿工业场地位置选择及开拓方案设计

通过对唐家河煤矿自然地形条件及外部条件分析,结合井下煤层赋存情况,设计提出三个工业场地选址方案和两个开拓布置方案,通过技术、经济比较,选择陈家湾场地立井开拓方式,减少了矿井初期投资及后期运营费。